| CARTER MFG. CO. CCNB-32-SB Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| CARTER MFG. CO. PHR-100-A Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| INA KRE80-PP Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| CARTER MFG. CO. CNB-20-S Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| CARTER MFG. CO. PHR-200-A Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| CARTER MFG. CO. SFH-20-A Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| CARTER MFG. CO. SC-48SB Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| IKO CFE 20-1 Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| CARTER MFG. CO. CCNB-128-S Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| CARTER MFG. CO. PHR-150-A Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| IKO CFE20BUUR Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| INA KR52 Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| CARTER MFG. CO. SFH-24A Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |
| CARTER MFG. CO. CNB-24-S Cam Follower and Track Roller - Stud Type | da:80.963 mm; Da:160 mm; Ca:49.809 mm; A1:98.425 mm; A2:206.375 mm; ba:34.925 mm; H:192.484 mm; H1:101.6 mm; H2:41.275 mm; J min.:260.35 mm; J max.:298.45 mm; L:349.25 mm; N1:22.225 mm; R1:60.325 mm; R2:27.781 mm; RG:3/8 NPT; PG:1/8 NPT; h:38.1 mm; Housing:SAF 518; Stabilizing ring:2 x SR-1518; Taconite seal:TER 188; End plug (suffix Y):EPR 11; Max. speed for Taconite seal:950 r/min; P60°:121 kN; P90°:72.5 kN; P120°:45.4 kN; P150°:40.5 kN; P180°:49.8 kN; Pa:8.1 kN; Mass pillow block:21.3 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:286.33 g; |