| CARTER MFG. CO. PHR-150-A Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| CARTER MFG. CO. PHR-100-A Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| INA KRE80-PP Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| CARTER MFG. CO. PHR-200-A Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| CARTER MFG. CO. SFH-20-A Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| CARTER MFG. CO. CNB-20-S Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| CARTER MFG. CO. CCNB-128-S Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| CARTER MFG. CO. SC-48SB Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| CARTER MFG. CO. SFH-24A Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| CARTER MFG. CO. CCNB-32-SB Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| IKO CFE 20-1 Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| INA KR52 Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| IKO CFE20BUUR Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |
| CARTER MFG. CO. CNB-24-S Cam Follower and Track Roller - Stud Type | da:80 mm; db:92.075 mm; dc:76.2 mm; Da:170 mm; Ca:67.793 mm; A1:98.425 mm; A2:160.338 mm; ba:36.513 mm; H:209.55 mm; H1:107.95 mm; H2:44.45 mm; J min.:269.875 mm; J max.:320.675 mm; J1:53.975 mm; L:361.95 mm; N1:19.05 mm; R1:63.5 mm; R2:26.988 mm; RG:3/8 NPT; PG:1/8 NPT; h:46.038 mm; Housing:FSAF 316; Stabilizing ring:2 x SR-1616; Labyrinth ring (db shaft position):LOR 84; Labyrinth ring (dc shaft position):LOR 60; End plug (suffix Y):EPR 10; Bearing limiting speed:5300 r/min; P60°:92.5 kN; P90°:55.6 kN; P120°:33.8 kN; P150°:30.7 kN; P180°:36.9 kN; Pa:23.6 kN; Mass pillow block:28.6 kg; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:298.3 N·m; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; |