LINK BELT CB22439E Cartridge Unit Bearings Overview |
|---|
| No. | Brand | B | D | d | Noun | Seals | UNSPSC | Weight | Inventory |
| FCB22439E7 | LINK BELT | - | 3.5 Inch | 88.9 Millimeter | 2.438 Inch | 61.925 Millimeter | Bearing | Triple Lip Contact | 31171501 | 7.26 | 0.0 |
| FCB22439EK6 | LINK BELT | - | 3.5 Inch | 88.9 Millimeter | 2.438 Inch | 61.925 Millimeter | Bearing | Spring Loaded Lip | 31171501 | 7.26 | 0.0 |
| PB22439EK152 | LINK BELT | 2.75 Inch | 69.85 Millimeter | 3.5 Inch | 88.9 Millimeter | 2.438 Inch | 61.925 Millimeter | Bearing | Spring Loaded Lip | 31171511 | 7.72 | 0.0 |
| PEB22439E7 | LINK BELT | 2.75 Inch | 69.85 Millimeter | 3.5 Inch | 88.9 Millimeter | 2.438 Inch | 61.925 Millimeter | Bearing | Triple Lip Contact | 31171511 | 7.72 | 0.0 |
| FEB22439HK5 | LINK BELT | - | - | - | - | - | - | 7.788 | 0.0 |
| PB22439FE | LINK BELT | 2.75 Inch | 69.85 Millimeter | 3.5 Inch | 88.9 Millimeter | 2.438 Inch | 61.925 Millimeter | Bearing | Spring Loaded Lip | 31171511 | 8.63 | 0.0 |
| PKB22439E7 | LINK BELT | 2.75 Inch | 69.85 Millimeter | 3.5 Inch | 88.9 Millimeter | 2.438 Inch | 61.925 Millimeter | Bearing | Triple Lip Contact | 31171511 | 8.63 | 0.0 |
| EPB22439E | LINK BELT | 2.75 Inch | 69.85 Millimeter | 3.5 Inch | 88.9 Millimeter | 2.438 Inch | 61.925 Millimeter | Bearing | Spring Loaded Lip | 31171511 | 7.72 | 0.0 |
| EPB22439FE7 | LINK BELT | 2.75 Inch | 69.85 Millimeter | 3.5 Inch | 88.9 Millimeter | 2.438 Inch | 61.925 Millimeter | Bearing | Triple Lip Contact | 31171511 | 9.616 | 0.0 |
| EPB22439E7E7C | LINK BELT | 2.75 Inch | 69.85 Millimeter | 3.5 Inch | 88.9 Millimeter | 2.438 Inch | 61.925 Millimeter | Bearing | Triple Lip Contact | 31171511 | 8.233 | 0.0 |
| FBB22439H | LINK BELT | - | 3.5 Inch | 88.9 Millimeter | 2.438 Inch | 61.925 Millimeter | Bearing | Floating Labyrinth | 31171501 | 7.95 | 0.0 |
| QM INDUSTRIES QMMC15J075SEN Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES TAMC13K060SO Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC13J208SEB Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC11J204SEO Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC13J065SN Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC13J065SEN Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC13J065SEC Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC13J207SEO Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC15J075SET Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC10J200ST Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC13J065SC Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES TAMC11K050SO Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC10J115SEC Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |
| QM INDUSTRIES QMMC13J065ST Cartridge Unit Bearings | da:85.725 mm; Da:180 mm; Ca:55.804 mm; A1:111.125 mm; A2:152.797 mm; S:4.763 mm; ba:44.45 mm; H:217.488 mm; H1:114.3 mm; H2:44.45 mm; J min.:295.275 mm; J max.:333.375 mm; J1:60.325 mm; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; R2:30.163 mm; RG:3/8 NPT; PG:1/4 NPT; h:42.069 mm; Housing:FSAF 520; Stabilizing ring:SR-20-17; Labyrinth ring:2 x LOR 101; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 15; Max. speed for PosiTrac Plus seal:1650 r/min; P60°:119 kN; P90°:71.2 kN; P120°:44.5 kN; P150°:40 kN; P180°:48.9 kN; Pa:13.8 kN; Mass pillow block:28.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:181.44 g; |