LINK BELT CSEB22563H Cartridge Unit Bearings Overview |
|---|
| No. | Brand | B | D | d | Noun | Seals | UNSPSC | Weight | Inventory |
| DSHB22563H30 | LINK BELT | - | - | 3.938 Inch | 100.025 Millimeter | Bearing | - | 31171533 | 130.3 | 0.0 |
| DSHB22563HHC18 | LINK BELT | - | - | 3.938 Inch | 100.025 Millimeter | Bearing | - | 31171533 | 116.22 | 0.0 |
| DSHB22563H36 | LINK BELT | - | - | 3.938 Inch | 100.025 Millimeter | Bearing | - | 31171533 | 145.28 | 0.0 |
| PEB22563FE7 | LINK BELT | 4.438 Inch | 112.725 Millimeter | 6.125 Inch | 155.575 Millimeter | 3.938 Inch | 100.025 Millimeter | Bearing | Triple Lip Contact | 31171511 | 37.898 | 0.0 |
| EPB22563FE7 | LINK BELT | 4.25 Inch | 107.95 Millimeter | 6.125 Inch | 155.575 Millimeter | 3.938 Inch | 100.025 Millimeter | Bearing | Triple Lip Contact | 31171511 | 32.23 | 0.0 |
| EPEB22563FE7 | LINK BELT | 4.25 Inch | 107.95 Millimeter | 6.125 Inch | 155.575 Millimeter | 3.938 Inch | 100.025 Millimeter | Bearing | Triple Lip Contact | 31171511 | 32.23 | 0.0 |
| PEB22563FE | LINK BELT | 4.438 Inch | 112.725 Millimeter | 6.125 Inch | 155.575 Millimeter | 3.938 Inch | 100.025 Millimeter | Bearing | Spring Loaded Lip | 31171511 | 36.287 | 0.0 |
| PB22563FE7 | LINK BELT | 4.438 Inch | 112.725 Millimeter | 6.125 Inch | 155.575 Millimeter | 3.938 Inch | 100.025 Millimeter | Bearing | Triple Lip Contact | 31171511 | 36.968 | 0.0 |
| PB22563FE | LINK BELT | 4.438 Inch | 112.725 Millimeter | 6.125 Inch | 155.575 Millimeter | 3.938 Inch | 100.025 Millimeter | Bearing | Spring Loaded Lip | 31171511 | 34.5 | 0.0 |
| CSEB22563E | LINK BELT | - | 6.125 Inch | 155.575 Millimeter | 3.938 Inch | 100.025 Millimeter | Bearing | Spring Loaded Contact | 31171535 | 16.39 | 0.0 |
| EFB22563E | LINK BELT | - | 6.125 Inch | 155.575 Millimeter | 3.938 Inch | 100.025 Millimeter | Bearing | Spring Loaded Lip | 31171501 | 29.03 | 0.0 |
| QM INDUSTRIES QMMC13J065SEN Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES TAMC13K060SO Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC13J207SEO Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC13J065ST Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC13J065SC Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC10J115SEC Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC10J200ST Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC13J208SEB Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC11J204SEO Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC15J075SET Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC13J065SN Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC15J075SEN Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES TAMC11K050SO Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |
| QM INDUSTRIES QMMC13J065SEC Cartridge Unit Bearings | da:101.6 mm; Da:200 mm; Ca:62.789 mm; A1:120.65 mm; A2:231.775 mm; S:4.763 mm; ba:50.006 mm; H:239.316 mm; H1:125.425 mm; H2:50.8 mm; J min.:320.675 mm; J max.:368.3 mm; J1:69.85 mm; L:419.1 mm; N1:22.225 mm; R1:67.866 mm; R2:31.75 mm; RG:3/8 NPT; PG:1/4 NPT; h:45.244 mm; Housing:SAF 522; Stabilizing ring:SR-22-19; Taconite seal:TER 110; End plug (suffix Y):EPR 13; Max. speed for Taconite seal:775 r/min; P60°:149 kN; P90°:89 kN; P120°:55.6 kN; P150°:50.7 kN; P180°:60.9 kN; Pa:17.3 kN; Mass pillow block:33.1 kg; Cap bolt:2 x 3/4-10 UNC; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.75 in; Initial grease fill:232.47 g; |