Angular Contact Ball Bearings
Angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.
- 80 mm x 170 mm x 39 mm FAG 7316-B-TVP Angular Contact Ball Bearings
- Spherical Plain Bearings - Rod Ends
- 0.0
- 100 mm x 215 mm x 82,6 mm FAG 3320-M Angular Contact Ball Bearings
- Sleeve Bearings
- 2.0
- FAG 3318-M-C3 Angular Contact Ball Bearings
- Bearings
- 0.0
- 85 mm x 180 mm x 73 mm FAG 3317-M Angular Contact Ball Bearings
- Mounted Cartridge Units
- 0.0
- 80 mm x 170 mm x 68,3 mm FAG 3316 Angular Contact Ball Bearings
- Cylindrical Roller Bearing
- 0.0
- 75 mm x 160 mm x 68,3 mm FAG 3315 Angular Contact Ball Bearings
- Flange Block
- 0.0
- 70 mm x 150 mm x 63,5 mm FAG 3314-DA Angular Contact Ball Bearings
- Mounted Units & Inserts
- 0.0
- 70 mm x 150 mm x 63,5 mm FAG 3314 Angular Contact Ball Bearings
- Cam Followers Stud Type
- 0.0