Single Row Ball Bearings
As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.
Single row deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speeds.Good radial load capacity.Acceptable axial load capacity in both directions.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance
- SKF R8Z Single Row Ball Bearings
- 60.000 mm
- 110.0000 mm
- SKF 8013 Single Row Ball Bearings
- 160.000 mm
- 240.0000 mm
- 70 mm x 150 mm x 35 mm TIMKEN 314KD Single Row Ball Bearings
- 1 in
- 1.1563 in
- 60 mm x 110 mm x 22 mm TIMKEN 212NP Single Row Ball Bearings
- 40.000 mm
- 90.0000 mm
- TIMKEN 625-2RS Single Row Ball Bearings
- 100.000 mm
- 215.0000 mm
- TIMKEN 6030-ZZ Single Row Ball Bearings
- 60.000 mm
- 130.0000 mm
- TIMKEN 6030-2RS Single Row Ball Bearings
- 110.000 mm
- 240.0000 mm
- TIMKEN 6021-Z Single Row Ball Bearings
- 150.000 mm
- 225.0000 mm
- SKF 87501 Single Row Ball Bearings
- 240.000 mm
- 360.0000 mm
- SKF 87500 Single Row Ball Bearings
- 240.000 mm
- 360.0000 mm
- SKF 87503 Single Row Ball Bearings
- 240.000 mm
- 360.0000 mm
- SKF 87038 Single Row Ball Bearings
- 105.000 mm
- 160.0000 mm