Sleeve Bearings
Sleeve bearings can be made from bronze, steel or stainless steel. Brass bearings and plastic sleeve bearings are also manufactured for certain applications. A common type of sleeve bearing that works well in applications requiring constant lubrication is bronze sleeve bearings, which sometimes contain lubricant plugs (PTFE or graphite) to help with lubrication issues. Another sleeve material used for light to medium applications, called oil impregnated bronze sleeve bearings, contains pores that absorb oil, which is released under applied force and then reabsorbed back into the bearing once the force subsides.
Sleeve bearings offer several advantages, including lower cost, less maintenance, greatly reduce noise at low speeds and easier installation. Sleeve bearing performance is also marked by a higher load capacity, especially shock load resistance due to their greater contact zone. Sleeve bearings with a conformal liner compensate for misalignment issues and vibration damping, these one-piece design low-friction bearings reduce housing dimensions and weight by having a thin wall section.
- ISOSTATIC FF-2203-2 Sleeve Bearings
- 95.000 mm
- 170.0000 mm
- ISOSTATIC EW-071201 Sleeve Bearings
- 200.000 mm
- 310.0000 mm
- ISOSTATIC EF-040607 Sleeve Bearings
- 200.000 mm
- 310.0000 mm
- ISOSTATIC EF-101410 Sleeve Bearings
- 50.000 mm
- 110.0000 mm
- ISOSTATIC EF-030508 Sleeve Bearings
- 190.000 mm
- 290.0000 mm
- ISOSTATIC EF-030503 Sleeve Bearings
- 35 mm
- 35.0 mm
- ISOSTATIC EF-081105 Sleeve Bearings
- 205FFS
- 25.000 mm
- ISOSTATIC EF-121509 Sleeve Bearings
- 200.000 mm
- 310.0000 mm
- ISOSTATIC EW-041001 Sleeve Bearings
- 280.000 mm
- 350.0000 mm
- ISOSTATIC EW-051201 Sleeve Bearings
- 200.000 mm
- 310.0000 mm
- ISOSTATIC EF-081005 Sleeve Bearings
- 1 3/16 in
- 1.5000 in
- ISOSTATIC EF-030505 Sleeve Bearings
- 75.000 mm
- 130.0000 mm